Very fine power amps! Superb performance.
A clean-sheet addition to the Audiolab range, the 8200MB is an advanced single-channel power amplifier capable of partnering loudspeakers of the highest calibre. With a rating of 250W, it is designed to deliver high power with ultra-low distortion.
In terms of sound quality, the 8200MB is an exceptional performer. Its high current ability enables it to drive the toughest of loads; even the most difficult speakers are driven cleanly without the loss of dynamics. The supreme neutrality that characterises Audiolab hi-fi components shines through, coupled to effortless reserves of current to call upon whenever required, so all you hear is the music – pure and unrestrained.
Supplying a choice of both balanced XLR and single-ended RCA inputs, the 8200MB is a power amplifier of enormous ability. Anyone seeking a flexible, compact, high-power monoblock for a stereo or multichannel system need look no further.
Specification
| Rated Output Power: |
250W/Channel into 8Ω, 2OHz-20kHz |
| Input Sensitivity: |
1.63Vrms for 250W into 8Ω |
| Input Impedance: |
20kΩ Balanced, 16kΩ unbalanced |
| Gain: |
29.0 dB at 1 kHz; Signal To Noise Ratio (IHF, rel. 0.dBW); 88dB |
| Frequency Response: |
20-20KHz±0.1dB, <0.1-120KHz-3dB |
| Total Harmonic Distortion & Noise: |
Less than 0.03%, 20Hz-20 kHz |
| Polarity (Phase): |
Non-Inverting |
| Muting: |
Muting controlled automatically |
| Operating Temperature Range: |
10-35℃ |
| Power Requirements (Depending on Region): |
50-60Hz 100V, 110-120V, and 220-230V models available
Maximum Power Consumption: 380VA
|
| Dimensions (WxHxD): |
216x150x379mm |
| Weight: |
Net: 9kg Shipping: 11kg |
|